How to Remove Caulk


Step 1: Apply caulk remover.

Photo: Tom Fenenga for Bob Vila

Having properly ventilated the work area, be sure to follow any other safety tips specified in the printed instructions for your chosen caulk remover. (Goo-Gone caulk remover works well.) Once ready, proceed to apply the product to the caulk you wish to remove, and then wait. The caulk remover, rather than making the sealant magically disappear, simply softens it. In most cases, the longer you let the chemical remover sit, the softer and more pliable the caulk becomes. Allow at least four hours. Note that a typical bottle of caulk remover usually covers about 20 or 30 linear feet of caulk.

Step 2: Cut caulk out of crevice.

Woman uses a utility knife to cut caulk from the top of a baseboard.
Photo: Tom Fenenga for Bob Vila

With the caulk now soft, remove it either with a caulk remover tool or a simple utility knife. Be careful with the latter, as there’s a danger of scraping the material on either side of the caulk bead. If the remover did its job, the caulk ought to come off rather easily. For any lingering residue, particularly in crevices, use a toothbrush or putty knife.

Step 3: Dislodge stubborn caulk with heat or alcohol.

Woman points hair dryer at caulk along a baseboard wall.
Photo: Tom Fenenga for Bob Vila

Sometimes those last vestiges of caulk can be remarkably stubborn. If you’re up against some caulk that won’t quit, one option is to cover the leftover caulk with alcohol-soaked rags, leaving them in place for a couple of days. Want a more direct method? Use either a heat gun or a hair dryer. With either, take care not to overheat the adjacent material (plastic, in particular, can be vulnerable to high temperatures). The leftover caulk, exposed to heat, finally ought to soften to the point where you can remove it with a removal tool, razor, brush or putty knife.

Step 4: Clean the surface of mildew or other buildup.

Finish the caulk removal task by cleaning the surface where the caulk used to sit. There may be a buildup of mildew and soap scum. To treat the mildew, apply water-diluted bleach with a cotton cloth. For soap scum, use the same technique but instead of bleach, opt for a homemade shower cleaner (a vinegar-and-water mixture usually does the trick).

With the right materials, a modest amount of know-how, and, yes, some luck, the process of removing caulk can be pretty painless. In home improvement, as in life, patience is a virtue. Take your time to get the job done right.




Orange Background

Get up to 50% off on all your Home decor by visiting our shop today at https://iced-drip.top/shop

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top